.. _geoopt: Geometry optimization ===================== Basic usage ----------- Optimizing a geometry means finding the geometry that minimizes the total energy for a given method. Now, suppose you want to calculate the optimized geometry of the amino acid **alanine** for a given method. The first step is to have some kind of guess geometry. You can `use Avogadro <../first_Steps/GUI.html>`_ to draw its structure and run the simple optimizer to get a reasonable atom arrangement: .. image:: geoopt_img/alanine.png :align: center and with those coordinates, you can already set up your ORCA input! .. note:: One can use Avogadro itself to make the input, save the molecule as a .xyz and read it (see :ref:`reading_external`), or add the coordinates directly to the :ref:`geo_sec` of the input using the "xyz" flag. If you want to optimize the geometry, for instance using DFT, all you have to do is to choose a functional and a basis set and add OPT to the main input:: !B3LYP DEF2-SVP OPT * xyz 0 1 N -0.83911 0.76325 -0.31843 C 0.61442 0.72014 -0.25075 C 1.01669 -0.56167 0.49740 O 0.20095 -1.36984 0.93753 H -1.37884 0.05803 0.17605 H 1.00414 0.66192 -1.27362 C 1.17285 1.95192 0.45211 H 0.87124 2.87150 -0.05988 H 0.81191 2.01288 1.48492 H 2.26726 1.92903 0.48485 H -1.30551 1.57618 -0.71069 O 2.33980 -0.77979 0.66176 H 3.04559 -0.08055 0.28096 * If everything is right, you should first see on the output, after the main header:: ***************************** * Geometry Optimization Run * ***************************** Geometry optimization settings: Update method Update .... BFGS Choice of coordinates CoordSys .... Z-matrix Internals Initial Hessian InHess .... Almoef's Model Convergence Tolerances: Energy Change TolE .... 5.0000e-06 Eh Max. Gradient TolMAXG .... 3.0000e-04 Eh/bohr RMS Gradient TolRMSG .... 1.0000e-04 Eh/bohr Max. Displacement TolMAXD .... 4.0000e-03 bohr RMS Displacement TolRMSD .... 2.0000e-03 bohr Strict Convergence .... False [...] where some of the parameters for the optimization are written. Then the SCF runs, followed by the calculation of a gradient and information related the current step is given:: .--------------------. ----------------------|Geometry convergence|------------------------- Item value Tolerance Converged --------------------------------------------------------------------- RMS gradient 0.0125516277 0.0001000000 NO MAX gradient 0.0693728096 0.0003000000 NO RMS step 0.0324468165 0.0020000000 NO MAX step 0.1852949368 0.0040000000 NO ........................................................ Max(Bonds) 0.0981 Max(Angles) 4.19 Max(Dihed) 2.11 Max(Improp) 0.00 --------------------------------------------------------------------- Since the guess geometry was far from good, none of the criteria for convergence are achieved on the first step. The geometry is then modified according to the default algorithm (a quasi-Newton method) and you can see the changes in geometry next:: --------------------------------------------------------------------------- Redundant Internal Coordinates (Angstroem and degrees) Definition Value dE/dq Step New-Value ---------------------------------------------------------------------------- 1. B(C 1,N 0) 1.4557 0.013403 -0.0155 1.4403 2. B(C 2,C 1) 1.5377 0.004146 -0.0057 1.5320 3. B(O 3,C 2) 1.2297 0.045759 -0.0236 1.2062 4. B(H 4,N 0) 1.0164 0.006262 -0.0075 1.0089 5. B(H 5,C 1) 1.0961 -0.009891 0.0141 1.1102 6. B(C 6,C 1) 1.5242 -0.009350 0.0123 1.5365 7. B(H 7,C 6) 1.0949 -0.003989 0.0057 1.1005 8. B(H 8,C 6) 1.0958 -0.003520 0.0050 1.1008 9. B(H 9,C 6) 1.0951 -0.006870 0.0097 1.1049 10. B(H 10,N 0) 1.0160 0.007909 -0.0095 1.0065 and the process is repeated until the criteria are met:: .--------------------. ----------------------|Geometry convergence|------------------------- Item value Tolerance Converged --------------------------------------------------------------------- Energy change -0.0000009421 0.0000050000 YES RMS gradient 0.0000326782 0.0001000000 YES MAX gradient 0.0001152425 0.0003000000 YES RMS step 0.0007124988 0.0020000000 YES MAX step 0.0017837746 0.0040000000 YES ........................................................ Max(Bonds) 0.0001 Max(Angles) 0.02 Max(Dihed) 0.10 Max(Improp) 0.00 --------------------------------------------------------------------- ***********************HURRAY******************** *** THE OPTIMIZATION HAS CONVERGED *** ************************************************* Here you can see how the geometry changes during the optimization: .. image:: geoopt_img/opt.gif :align: center Although the initial guess appeared to be good, as one can see, the B3LYP functional predicts the geometry somewhat different from the input given. The initial guess had the amine group in a more planar configuration that was fixed by the optimization, along with corrections in the bond lengths. .. important:: After a geometry optimization run, a file named basename.xyz is printed with the final geometry coordinates that can be later used in following calculation You can also see how the energy of the molecule goes down as the optimization progresses, leaning towards convergence: .. image:: geoopt_img/enconv.png :width: 600 :align: center Is this a real minimum? ----------------------- How can one know if this is a real minimum? The norm of the gradient is also zero at saddle points, or maybe the gradient was low, but not sufficiently low. It is possible to check that by calculating the `vibrational frequencies `_ on the final geometry, adding a FREQ keyword on the main input:: !B3LYP DEF2-SVP OPT RIJCOSX FREQ * xyzfile 0 1 alanine_guess.xyz Then, after computing the exact Hessian, the frequencies will be printed:: ----------------------- VIBRATIONAL FREQUENCIES ----------------------- Scaling factor for frequencies = 1.000000000 (already applied!) 0: 0.00 cm**-1 1: 0.00 cm**-1 2: 0.00 cm**-1 3: 0.00 cm**-1 4: 0.00 cm**-1 5: 0.00 cm**-1 6: 59.59 cm**-1 7: 231.28 cm**-1 8: 245.18 cm**-1 9: 254.63 cm**-1 10: 321.35 cm**-1 [...] and you can see, all frequencies besides the first translations and rotations are positive, that means we do have a true minimum. .. important:: All positive frequencies guarantee a **local** minimum, but not necessarily a **global** minimum! Numerical gradients ------------------- The quality of the final geometry depends on the quality of the method you choose. In case you want to optimize the geometry for a method to which there is currently no analytical gradient, you can ask for the numerical gradient using the NUMGRAD flag:: !DLPNO-CCSD(T) cc-pVTZ cc-pVTZ/C OPT NUMGRAD .. warning:: Take care when using numerical gradients, the calculation will take **much** longer if the system is large. How to remove negative frequencies? ----------------------------------- It is not uncommon that, after a geometry optimization run, you end up with one or more negative frequencies, notably if your system has weak intermolecular interactions. It might be that you are stuck on a saddle point or that the optimization criteria was just not good enough. If you have many small negative frequencies, you probably just need a tighter convergence:: !TIGHTOPT or, in drastic cases:: !VERYTHIGHTOPT and it should do it. If your system has one large negative frequency, it might be closer to a saddle point than a minimum. Then, the best solution would be to take your final structure and displace it in the direction of that mode. For more info check :ref:`negative_freq`. A comment on DFT and OPT ------------------------ DFT is known to perform poorly with intermolecular or weak interactions. In general it is advisable to use the D3 :ref:`bib:[Goerigk2011]` or the charge-dependent D4 :ref:`bib:[Grimme2017]` corrections:: !B3LYP DEF2-SVP OPT D3 or:: !B3LYP DEF2-SVP OPT D4 These will correct both the energies and gradients and lead to much better results.